Double
stations Vacuum Forming Machine
Double stations vacuum forming
machine applications
Double stations vacuum forming
machine is adapt for PVC, PP, PET, PEGT, OPP, POF, PS,
ABS etc, it can transform plastic sheets into various plastic blisters. These
blisters are widely used in hardware, stationery, commodity, electronic
products, health products, disposable cups etc.
It`s also suitable for the blister
packaging in toys, hardware, food, electronic products, medicine, commodity and
so on.
Double Stations Vacuum Forming Machine Features
1. Double mould
plates design, the heat furnace can heat to the two mold plate respectively.
The working efficiency is nearly twice as fast as that of the single mould
plate machine
2. 25pcs ceramic infrared heating boards which can be controlled
separately, suit for different size or different thickness material.
3. 25pcs Solid state voltage regulators, control heating boards simple and
visualized.
4. Large-scale cooling fan which can cool the products quickly.
5. Water-spray cooling system which suit for thick material.(optional)
6. Manual and Semi-auto style.
7. Button or pedal control available, improve the efficiency.
Double
stations vacuum forming machine Parameters
Model
HX-61A
Power supply
AC380V 50/60HZ
Power
13.0KW
Max. forming size
560*610mm
Max. forming height
200mm
Speed
300~500moulds/H
Thickness of material
0.2~1.5mm
Machine size
2700*1200 *2000mm
N. weight
1200KG
Double Stations Vacuum Forming Machine Double Stations Vacuum Forming Machine,Double Stations Vacuum Plastic Forming Machine,Double Stations Blister Vacuum Forming Machine,Double Stations PVC Forming Machine ShenZhen Hengxing Machinery Factory , http://www.szchxjx.com
Planetary gear transmission has the advantages of compact structure, small size, light weight, large transmission ratio range, high efficiency, stable operation and low noise. The volume is optimized to minimize the quality and can not bring obvious economic benefits. After the mining car has been used for a period of time, some wheel reducers begin to have failure problems. It is necessary to optimize the design of the planetary gears with the maximum safety factor within the existing installation size range to improve the service life.
Compared with the quality of mining vehicles, the quality of the planetary gear reducer of the Roots water ring vacuum unit is negligible. Therefore, an optimization calculation model with the highest safety factor is established, and the highest safety factor is achieved by optimizing the number of gear teeth and the displacement coefficient under the installation conditions. The discrete variables and continuous variables are processed separately, and the complex method is used to calculate with MatLab programming. Through optimization calculations, the contact stress safety factors of the sun gear and the planetary gear are respectively increased by the Sichuan vacuum pumps 9 and 10, which significantly improves the service life.
Dynamic analysis of electro-hydraulic main control valve for general hydraulic support, Lian Zisheng Taigong University of Mechanical Engineering College, Taiyuan, Shanxi 030024, China Abstract: According to the force analysis of electro-hydraulic main control valve, the mathematical model of the main control valve is established [1], and A complete electro-hydraulic control system was built under the AMESim environment. By analyzing the dynamic characteristics of the main control valve and the opening sequence of the two spools, the displacement, flow and pressure response curves of the main control valve were obtained. The results show that steady-state hydraulic power is a key factor affecting the dynamic performance of the spool.
April 29, 2019