Process:
The foil roll is introduced into the rubber roller of the feeding device via the decoiling machine and then would in the winding former after passing through the edge of the shearing machine and the roller wheel of the burr pressing device. The inter layer insulation coil is erected in the rear of the coiling optical shaft of the foil winding machine and wound in the winding former after sheared by the trimming roll and the shears blade.
Functional feature:
1. The device adopts and electrical servo deflection correction system to achieve manual/automatic adjustment of the foil position more conveniently and reliably.
2. An advanced electrical control technology of constant tension is adopted to control the tension of the foil and the inter layer insulation, with the features such as quantitive, accurate and convenient control of the tension no mechanical friction. The required tension can be maintained for forward winding, stop and backward winding, ensuring compact coils.
3. The inter layer insulation adopts a cantilever mechanism, convenient for feeding and the mechanism can be pulled out as a whole without guide rails outside the body.
4. Automatic welding mechanism and roll shearing mechanism adopt ball screws and linear guide rails for drive, ensuring the service life and accuracy of the device.
5. This device first adopts the all-in-one sing frame, solving problems such as few coil urns and deflection correction lag.
6. This device is a hi-tech product produced by combining with actual production on the basis of many similar products at home and abroad. The whole machine is controlled via an advanced PLC touch screen, with high automation level and simple and reliable operation, representing higher production level of domestic foil winding machines.
Cnc Winding Machine,Foil Winding Machine,Cnc Wire Winding Machine,Hv Foil Winding Machine JINAN EURO-ASIA MACHINERY CO., LTD , https://www.eaelectricmachine.com
According to foreign media sources, about 50 companies expressed initial interest in GE Lighting's sale. In the second quarter, GE will meet with key and potential customers and plan to accept bids in the third quarter. GE said the plan will complete the transaction in the fourth quarter. According to foreign media sources, about 50 companies expressed initial interest in GE Lighting's sale. In the second quarter, GE will meet with key and potential customers and plan to accept bids in the third quarter. GE said the plan will complete the transaction in the fourth quarter. The remaining business will likely be packaged for sale: including GE Lighting, Current, and GE's acquisition of Daintree Networks, an emerging building automation company based in Melbourne. However, the sales table also clarifies the difference between GE Lighting and Current, so GE may also sell these businesses separately. GE hopes the price of the merger will be $1 billion, but there are also rumors that the price should be between $400 million and $600 million. Some say that the company may have valued $1 billion in the past few years, but not today. In addition, there have been reports in the media that Mulinsen and Foshan Lighting have been negotiating with banks for possible asset acquisitions, but Mulinsen has publicly denied that they are interested. Now, Mulinsen already owns 100% of LEDVANCE. Obviously, it is unlikely that one company will have both GE Lighting and LEDVANCE. It is worth mentioning that, given the Sino-US trade war, sources worry that the Trump administration does not allow a Chinese company to purchase GE lighting.
November 24, 2021