S5 machine tool structure machine adopts integral casting bed, the bed is inclined forward by $VW, the guide rail is rigid and the chip removal is convenient. The machine tool adopts the intermediate drive, the spindle box is placed in the middle of the bed, and the workpiece is rotated by the vehicle; the tailstock has a tailstock and a knife holder at both ends; the tailstock supports the workpiece through the tip to ensure that the two ends of the workpiece have higher Axis; the left and right tool holders are driven by servo motor and ball screw to realize two-coordinate linkage for machining outer circle, end face, conical surface, arc surface and thread; left and right tool holders simultaneously process both ends of the workpiece. Increased production efficiency. The machine tool spindle adopts frequency conversion speed regulation, which is convenient for the user to select the corresponding spindle speed according to the diameter of the workpiece. The spindle servo motor is used to realize the constant line speed turning of the workpiece through the numerical control system. This speed regulation method can ensure low-speed constant torque output, high-speed constant-power output, large speed range, good static stability, high operating efficiency, simplifying the transmission system, reducing transmission failure, ensuring transmission accuracy and achieving The constant line speed output of the spindle. The shaft has an absolute position encoder as a position feedback device. The position encoder can automatically memorize the position of each point in the full stroke of each feed axis. No need to return to the zero switch. After each power failure or emergency stop, it is not necessary to re-set the reference point. The position of the reference point is permanently unchanged and is stored by the memory dedicated to the absolute position encoder. It is not only stable, but also extremely convenient for operation and adjustment. The use of a precision ball screw pair as a linear drive actuator ensures the positioning accuracy and repeatability of the machine, reduces machine energy consumption and simplifies machine design. CNC programming is manually programmed according to the processing part of the test piece. The machine structure is horizontal. The cast bed is designed with a tilted M overall design, with sufficient rigidity and strength, and fully aging treatment to ensure no deformation and reliable stability. The sliding guide is plasticized to reduce friction and improve sensitivity. The components are reliable in positioning, stable in operation, easy to disassemble, easy to install and easy to maintain. The whole machine is designed with a pleasant design and is safe and convenient to operate. (Finish) Weight Checker,Weight Checker Machine,Conveyor Weight Checker,Weight Checker Online DURZERD PACKAGING MACHINERY CO., LTD. , https://www.durzerdmachine.com
June 30, 2021