Found on Govdeals.com: The 2001 Pierce Saber is a tilt-cab chassis fire truck equipped with an 8.7L L6 diesel engine and a 40 Series Detroit Diesel. It features a Waterous CS series pump capable of 1,500 gallons per minute. The last pump test was conducted in August 2018 and passed successfully. However, the frame shows significant rust damage, especially on the right front section. The engine requires a full frame-in rebuild and currently produces a large amount of blow-by. Despite this, all other equipment is reported to be in working condition. Emergency lighting and sirens may remain on the vehicle if the buyer is an authorized emergency service provider; otherwise, they will be removed. Decals will also be taken off before the sale, and the generator is not included. This unit was taken out of service in September 2019 and used as an emergency reserve unit. It starts and runs but is in poor condition overall. The pump hours are correctly listed at 253, while the engine hours of 2,776 are incorrect. A physical inspection is strongly recommended before bidding.
PVDC High Barrier Shrink Bag is a kind of Barrier Bags, which uses PVDC as the oxygen barrier. PVDC Shrink Bag can greatly extend the shelf life of food, especially fresh meat. Tipack uses the core multi-layer co-extrusion technology to make the Shrink bag, which fundamentally avoids the use of adhesives and makes the product safer.
The core technology of Tipack is multi-layer co-extrusion high-barrier material technology, which can achieve the best matching of various material properties, meet the needs of safety, convenience, nutrition, and deliciousness required by food and other packaging, while completely avoiding the solvent of traditional packaging. Residue, high energy consumption, poor strength, poor transparency and other problems. The main application fields are: fresh meat, prefabricated food, soft canned food, capsule beverage, dairy bakery, quick-frozen food, cooked food takeaway, high barrier sheet, etc.
high barrier bags,oxygen barrier bags,barrier bags food,heat shrink wrap bags,clear barrier bags Tipack Group , https://www.tipackgroup.com
2001 Pierce Saber
Auction Ends
5/12/21 4:00 PM ET
Remaining
6 Days 16 Hrs
This item is subject to an auto
extension of the auction end time.
Refresh Bid & Time
Reserve Not Met
Tax
See Payment Instructions
Buyer’s Premium
12.50%
Starting Bid
$1,000.00
Bid Increment
$25.00
Minimum Bid
$1,000.00
About Tipack
The advantages of multi-layer co-extrusion:
· Strong functionality
In multi-layer co-extrusion, materials with different properties can be combined according to needs, so that they have different functions of multiple materials at the same time. For example, the use of PE material in the inner layer will make the packaged product have good heat-sealing performance and mechanical properties; the use of EVOH/PVDC barrier material can effectively block oxygen and water, prolong the shelf life of food, and effectively lock in freshness.
· Lower cost
The multi-layer co-extrusion high-barrier material technology is a multi-layer co-extrusion one-time molding process, which does not require traditional composite, coating and other post-processing processes, which can effectively reduce raw material costs and production processes, not only save production costs, but also control the thickness of packaging materials. It is possible to achieve thinning feasibility. And to achieve the same barrier effect, due to the simple process, the cost of the produced product can be reduced by 10%-20% compared with the composite product.
· Other advantages
Safe and environmentally friendly green packaging, without any residual solvent, to avoid food safety problems; it can be used for low temperature freezing at -30 °C, or high temperature cooking or boiling sterilization at 121 °C; easy to print and meet various color requirements; multi-layer co-extrusion layer The more the number, the greater the advantage in thinning expensive materials; the more flexible the structure adjustment between material layers, the more applicable formulas, and the wider the range of products.
June 26, 2025