Metal sheets or strips suppliers always need slitting and cut to length machine line for the production of metal sheets with different widths or lengths from GI, PPGI, or Stainless coils in large quantities.
A metal Slitting Machine Line has been designed to cut longitudinally the wide steel coils (usually less than 1250mm width and thickness less than 3mm) into different narrow steel strips for producing continuously cold formed sectional steel products, like C/Z Purlin Roll Forming Machine,light gauge framing machine,Crash Barrier Roll Forming Machine
Steel Slitting Line,Stainless Steel Coil Slitting Line,Coil Slitting Machine,Slitting Machine Line Botou Golden Integrity Roll Forming Machine Co.,Ltd , https://www.jcxsteelrollformer.com
1. Generally, you can check on the management computer whether the issuer of the card number is faulty, and then open the side door to see if it is stuck. If not, you can remove the card holder, push the card back, and then install it. .
2. If the card is jammed on the passage of the coil card, we can turn the coil card and take out the card. If we can't figure out if the card has been deformed, we can open the front door, take out the card and restart the card. The machine can solve the problem.
3. When the vehicle enters the field, there is a prompt tone “please press the key to take the cardâ€, but the button cannot take the card. If such a failure occurs, we can first observe whether the bayonet LED is normal (usually the strobe is normal, and the flash is abnormal). Then check whether the workstation is normal on the computer and whether the card communication is faulty. After eliminating these problems, you can restart the card and let the driver get the card again.
Well, on the issue of automatic parking card dispenser failure we introduced here, here shows that different manufacturers are not the same card issuing machine, here is only played a reference role.
Through the automatic card issuer, temporary vehicles will automatically receive cards when they enter the parking lot. This not only facilitates the management of temporary vehicles, but also eliminates the need for manual issuance of cards, and also reduces the work intensity of the depot managers. This is a must for some temporary vehicles. One of the prepared equipment. However, if the automatic issuance machine is not working properly, some minor faults will affect the normal operation of the parking lot system. Therefore, in order to eliminate the malfunction immediately, we introduce some troubleshooting methods of the automatic issuance machine for your reference.
September 13, 2019