Today's chat is a small, hands-on question, because before you see a lot of friends tangled, it's most appropriate to get rid of all kinds of stickers on the car. So just take it out and share it. Actually, there are no shortcuts or coups. For the good guys, it's nothing but a friend who is still sharing the details. As for why you want to get rid of these stickers attached to the car, Xiao Bian feels that there is no need to chat, some of the owner's own car stickers on the car, do not like to be removed; some are to go to some 4S stores to do maintenance, 4S shop to The name of the shop's car LOGO (without the owners agreed to affix the LOGO is indeed very uncomfortable ......); there is the owner of the original appearance and the model for the appearance of the overall car to get rid of, and this situation is also a lot, as to collapse Whether the vehicle sign affects the vehicle inspection is theoretically because the appearance of the vehicle body cannot be changed. However, the actual situation has not yet been seen. Because the sign of the vehicle impacts the inspection of the vehicle, this matter is not much to talk about. As for why you have to make your own decisions, Xiao Bian will not tangled up with you. If you are really bothered, it is not a problem to ask the store to help you when you wash your car (if you are willing to do so). How is it? It's very difficult to say if you just squat down, so give up on this, it's too expensive and worthless. The car's logo and LOGO are made of adhesive glue. If you want it to be easier to squat down, the key is to heat it. After heating, the glue will become soft and it is very simple. Hair dryer - good but not recommended On the heating part, the hair dryer is a better tool, the effect is no problem, but the construction environment for the vehicle will be limited, the place where the car is parked rarely has 220V power (unless they have an independent garage single said), So how to power a hair dryer that uses 220V AC power becomes a problem. 1: It is best to have a car inverter (12V DC to 220V AC), but this thing is not a universal tool; 2. If your car has no power supply in the trunk, the length of the cable is also a problem, so this requirement Too many ways, Xiao Bian is not very recommended. Pouring hot water - the best way to achieve soil The purpose is to heat the glue, so the process is not important. Burning a pot of boiling water to get it next to the car should be the least costly method. The effect will not be bad, of course, if you have better tools and conditions. You can try, in short, soften the glue on the line. What are you using? It's not a big problem if the car is glued down and it's not a big problem. If it's not strong enough, you can use it with a few hands to get it down. If the glue is strong, you still have difficulty using your hand. It's worth the nails to get lost, so it is better to use some gadgets that can be found easily. Various cards Something that will be on the car and on the body is cards, ID cards, bank cards, discount cards, etc. If there are cards that are thinner than these cards, for example, when you are young, you have to use a pad or something. Side of the car to force it to separate from the body, is still a better way, but because the card is not too thin, so easy to stick in the car or easy to leave a lot of plastic on the body, behind the slowly Clean up. Fishing line - weapon If your family has someone fishing, it would be great. You can take a small section and you can do a great job. The thin, sturdy fishing line can perfectly remove some sticky things. Even if it is not suitable for hot water, use fish directly. Separation of car stickers and bodywork is also very easy, but it is best to wear gloves to carry out this item, otherwise the hand is easily injured and the fishing line is also very sharp. What about the remaining glue? After the car sticker is completely removed, it will not be completely clean. The ugly residue glue must also be handled cleanly. The quickest way is to use glue and special tools. However, in the general car and at home, this item will not be kept. If you don’t have it, look for medicine in the medicine box at home. It’s also good to use. If you don’t have anything at hand, remember the hot water bar just mentioned, pour it on the towel, and use it for a while. The nails are gone. Last but not least, I would like to remind you that there is still a problem of time if your car is new or not. If your car is a new car you just bought, but the 4S shop has posted a shop name LOGO or something else, it's a problem. No, if it is an older car, especially a light-colored paint car, such as white, silver paint, after the wind and sun have been darkened, yellowing situation, this time if you are If the LOGO of a parking space collapses, even if it is handled perfectly, it will leave traces of shallow words at the rear of the vehicle.
This Sandwich Steering Wheel Cover use good quality mesh material produced by well-designed, good workmanship, Comfortable and Convenient to use. The unique personalized design is enables you to enjoy the driving pleasure.
1. Constant temperature, ventilation;
2. Good elasticity, buffer protection function;
3. Light texture, washing easily, quick-drying;
4. Anti-bacterial, environmental, Anti-allergic;
5. Comfortable and durability.
Sandwich Fabric Steering Wheel Cover Sandwich Steering Wheel Cover,Sandwich Mesh Steering Wheel Cover,Honeycomb Steering Wheel Cover,Steering Wheel Covers Ninghai Chunye Car Accessories Co.,ltd. , http://www.chunyeauto.com
This Sandwich Steering Wheel Cover Have Some Advantage:
September 05, 2019