Model NO.: LL-LZ-55-12
HS Code: 84552210
1, Main Parameter
1), Raw Material : hot-dip galvanized steel strip
2), The thickness of the raw material: 0.5-1.8mm
3), The width of the feed-in:300mm
4), Main drive motor: Servo controler and motor( IMS-GCT407.5WGL0D controler with Isolation card controlled servo motor SM-07.5C4S5)
5), Working voltage: 380v 50hz  
6), Forming steps: 14steps; Forming rollers with 3 points Support; Equipment running smoothly 
7), Gear reducer:ARC hard tooth surface gear reducer;Running noiseless. The reducer has a good return and durability. Servo motor special reducer.
8), Main forming machine use welded steel structure 
9), Transmission mode : gear wheel transmission( the material of the gear wheel use 45# steel, the surface disposed by high frequency )
10), Roller shaft use 45# steel, modulation disposal, the hardness of the modulation is  HB250-280.surface grinding. The outer diameter is 55mm 
11), Roller mould use Gcr15,salt bath quenching. hardness is HRC58-62
12), Production speed: 0-40M/min; Vertical keel for partition wall punching speed: 18M/min
13), Max tolerence of the forming products : 0.4mm
14), Feed-in material way : from left to right
2,Vertical uncoiler deviceL Model No.:MT-400
    1) Max uncoiler width  350mm
    2) Thickness of the material  2.0mm
    3) Inner diameter of the coil  450-530mm
    4) Outer diameter of the coil  1500mm
    5) Max bear weight of machine  1200kg
    6) Tension is hand brace
    7)Motor driven device
 3,Cutting/punching device 
    1) Cutting device not stop, servo cut off; Servo motor driven( IMS-GCT407.5WGL0D controler with 
 
Isolation card controlled servo motor SM-07.5C4S5); High precision Ball screw drive
2) Cutting power   High speed hydraulic cutting.( 0.6s can complete one set cut reciprocating.)
   3) The form of the cutting: 45 degree skew; No cutting scrap
    4) High speed hydraulic cutting and punching
4,Operation Panel and control
    1) Touch screen panel;Cutting length and products quantity can be set freely;The machine can automatic stop once the set up production quantiy finished.
    2) Main machine control: PLC control 
    3) Length measure: High precision Rotary encoder .Fixed - length precision ±1.5mm
5. Packing List for Machine
Item Model Q'TY Remarks
Roll forming machine LL-(A.E)CL55-14A 1  
Roller mould Combination  1 Attached with machine
Servo cutting device -- 1 -----
High speed hydraulic punching machine ---- 1 Attached with machine
Collector(scale) -- 1 -----
Servo control cabinet --- 1 -----
Electrical operation box   1 Attached with machine
Hydraulic station --- 1 -----
vertical collector -- 1 1500kg(Electric drive
Cutting mould --- 3  
Punching mould ---   Attached with machine



Automatic Stud and Track Roll Forming Machine with ISO 9001: 2008



 

EVA Wood Grain Building Blocks

EVA Wood Grain Building Blocks is a kind of block that looks like real wood grain. Made from Eco-friendly, closed cell, non-smell and non-toxic EVA foam material, passes ASTM and EN71 certificates, the safety of this product is the last thing needs to be worried.

EVA Wood Grain Building Blocks
Wood grain EVA Building Blocks are produced considering the natural and beautiful look of real wood, but due to it is made from EVA foam material, it is lighter than plastic or real wood blocks, avoid baby from hurt of heavy thing even just a small plastic or real wood block.

The foam building blocks are easy to store and carry cause it is packed with a PVC bag with zipper. Also after a long time of playing, the blocks can be cleaned easily with water thanks to its closed cell foam.

Eva Wood Grain Building Blocks,Wood Grain Building Blocks,Eva Wood Grain Blocks,Children'S Building Blocks,Custom Wood Building Blocks,Wood Grain Block

Huizhou City Melors Plastic Products Co., Limited , https://www.melorsmat.com

October 26, 2022