Compact Feed Lines with compact design are preferred to be used in case of only small available space as well as in case of less delicate coil material with big material square. They normally are used at middle-sized feeding lengths and middle-sized number of press strokes per minute.
By combination of straightener and roll feed into one part, so called feeder-straightener, which is positioned directly at the press, the needed space for a material loop of straightened material can be saved.
The feeder-straightener is supplied with material out of a very small loop of not straightened material below the Decoiler.
The decoiler is equipped with a variable speed drive as well as with a very sensitive loop control. By this way it is assured that there always will be enough material available for supply of the feeder-straightener.
In case that feeding lengths and stroke rates do require a bigger material stock within the material loop, the Compact Coil Feed line will be completed with a loop pit.
With our Coil Processing Systems you can process coil material width from 400mm to 1800mm, coil thickness from 0.6-6.0mm, coil weight up to 20000kgs.
Compact Feed Lines Compact Feeder Line,Compact Coil Feeding Line,Compact Press Feed, Compact Press Feed Lines,Compact Press Feeder Line, Press Feedling line Mayflay Machinery(huizhou) Co.,LTD , http://www.pressfeeders.comFounded in 2001, we are specialized in design & manufacture stainless steel valve for industrial fluid control system. Our products include pneumatic angle seat valve, shuttle valve, ball valve, butterfly valve, pressure reducing valve, steam trap, check valve and strainer, which are widely exported to USA, Europe, Asia, Africa, in total 62 countries.
Techincal data:
Fluid Pressure
Max. 1.6MPa (16 bar, 232Psi)
Control Pressure
0.3 - 0.8MPa
Applicable Fluid
Neutral gas, air
Body Material
CF8M (AISI 316) or CF8 (AISI304)
Seat
Teflon (PTFE)
Actuator
CF8 (AISI304)
Actuator Size
40mm, 50mm, 63mm, 90mm, 125mm
Applicable Fluid
Water, alcohol, oil, fuel, steam, neutral gas or liquid, organic solvent, acid and lye
Max. Viscosity
600 mm2/s
Fluid Temperature
-10 - +180ºC,25 - +220ºC
Ambient Temperature
0 - +80ºC
Control Type
Single acting (NO/NC), Double acting
Applications:
1.EPS(Expanded Polystyrene) molding machines  Â
Advantages:
Easy installation, maintenance-free, super long life;
Reliable operation, self-adjusting stem seals, cylinder can be 360° Rotated free;
Anti-corrosive, high flow rate, low fluid resistance, no water-hammer;
Optical position indication, low control air consumption.
OUR PARTNERS:
CONTACT US
Model NO.: 100 Series
Service Life: >3 Years
Control Type: Single Acting (No/Nc), Double Acting
Actuator Size: 40mm, 50mm, 63mm, 90mm, 125mm
Body Material: CF8m (AISI 316) or CF8 (AISI304)
Actuator: CF8 (AISI304)
Seat: Teflon (PTFE)
Fluid Pressure: Max. 1.6MPa (16 Bar, 232psi)
Control Pressure: 0.3 - 0.8MPa
Ambient Temperature: -10ºC- +80ºC
Trademark: ESG
Transport Package: Seaworthy or Airworthy
Specification: CE, ISO9001, CU-TR
Origin: China
HS Code: 8481804090
2.Dyeing machine , Textile Additive Mixing
3.Food& Beverage machine (Filling machine for drinks, bear,etc.)
4.Gas Generator, Air separation machine
5.Medical equipment
6.Chemical industry
7.Disinfection , Hospital Sterilizer
8.Water disposal
9.Rubber manufacturing machinery
10.CIP
11.Semiconductor
12.Shipbuilding equipmentÂ
August 23, 2018