EPC-20L Bottle Blow Molding Machine for 3Gallon to 6Gallon PET bottle
Specification:
1)Â Â Adopting double crank to adjust mould, heavy locking mould, stable and fast, Adopt infrared oven to heat the perform, the perform rotated and heated equally.
2) The air system has been divided into two parts: Pneumatic action part and bottle blow part to meet the different requirements for the action and blow. It can provide sufficient and steady high pressure for blowing large irregular shaped bottles.
3) The machine is also equipped with muffler and oiling system to lubricate the mechanical part of the machine.
4) The machine can be operated in the step-by-step mode and the semi- auto mode.
5) The machine is small with low investment, easy and safe to operate by one person.
TYPE
ITEM
MEASUREMENT
EPC-20
END PRODUCT
 Material
------
PET
Volume
L
10-25(1-cavity)
Theoretical output
pcs/h
            90
Max.length
mm
460
Max.diameter
mm
200
MOULD PLATE
Max.mould plate dimension(L*H)
mm
420*500
Max.mould thickness
mm
40
Clamping force
KN
330
Mould opening stroke(Adjustable)
mm
33
AUXILIARY
High pressure compressor
M3/Mpa KW
>=1.2/3.0*1sets 15
Air cooling dryer
M3/Mpa KW
>=1.0/3.0*1set 0.375
Precision air filters
M3/Mpa
>=1.0/3.0*2pcs
Dimension(L*W*H)
M
2.2*1.9*2.2
MAIN MACHINE ELECTRICITY
Power
KW
40
Voltage/Frequency
V/HZ
220-380/50-60
MACHINE SIZE AND WEIGHT
Blow unit dimension(L*W*H)
M
2.10*0.77*1.96
Blow unit weight
T
1
Pre-heater weight
T
0.38
Pre-heater dimension(L*W*H)
M
2.37*0.68*1.65
July 24, 2018