Stamped Parts: Stamped Parts Metal Stamped Parts, Stamped Part, Stainless Steel Stamped Parts Ningbo Borine Machinery Co.,Ltd. , http://www.borine-agroparts.com
If you feel that the fuel consumption of the vehicle has increased, do you know what caused it?
1. Mechanical factors: The efficiency of the automobile caused by the failure of the vehicle was reduced. The car engine is worn out; overhaul the engine.
2. Insufficient tire pressure: Always pay attention to the condition of the tire and maintain the tire pressure. This will not only save fuel but also increase the service life. The brakes bite; you can make a slow neutral slide test on your own and make sure that the brakes do not have this condition.
3. Man-made operating factors: The warm car is too long; after launching it, at most 30 seconds, all the warning lights can be turned off to confirm that they can go on the road. Driving violently; urging to step on the accelerator to accelerate the emergency brake, or slam to extreme speed, in addition to fuel consumption, the machine also accelerates wear and tear and should be avoided as much as possible. Open the air conditioner to sleep or wait for a long time without turning off, in addition to fuel consumption, and the engine is prone to carbon deposition. Prolonged use of unnecessary electrical appliances, such as defogging lines, fog lamps, etc., because the world does not eat lunch, the consumption of electricity will also be passed on gasoline consumption. Air-conditioning cooling efficiency drops.
4. Traffic factors: Short-term use; the engine may not have been heated to the normal working temperature, ie arrive at the destination. Due to the low efficiency of the cold machine, the fuel is mostly consumed for warming the engine and the cooling water. The fuel consumption is unavoidable. The condition of the car will also cause the engine to deposit carbon. Urban traffic; urban traffic due to traffic jams and traffic lights, stopping and driving fuel consumption even several times the highway.
5, other factors: If you put too much debris in the car over the long term will also lead to increased fuel consumption.
Stamped Parts are one of the most widely used and welcome products in
the market, Agricultural, Industrial, Power equipment, Traffic
Equipment, Construction Equipment and manyu others are all need Stamped
parts. High quality material selection.powerful and precise
heat-treatment ability and excellent assembly methods and Surface
treatment methouds ensure Borine' Stamped parts meet strong and high
efficiency needs of modern society. Borine' Stamped parts are all by
inspected strictly before shipping tocustomers.
September 09, 2019