project MODE knob CRT/MDI panel operation instructions Note Display NC program directory EDIT Press the PRGRM button; press the "Lib" softkey. Select a NC program EDIT or AUTO Press the PRGRM key; press → 7 O Type the letter “Oâ€; press the number keys to type in the searched number: XXXX; press the CURSOR down arrow key to start the search. When found, "OXXXX" is displayed at the program number position in the upper right corner of the screen and the NC program is displayed on the screen. Back to NC program header EDIT or AUTO Press the PRGRM key; press → 7 O Type the letter “Oâ€; press the CURSOR down arrow key. Delete a NC program EDIT Press the PRGRM key; press → 7 0 to type the letter “Oâ€; press the number keys to type the number of the program to be deleted: XXXX; press the DELET key. Remove all NC programs EDIT Press the PRGRM key; press → 7 0 to type the letter “Oâ€; press the →70 key, type “9999â€; press the DELET key. Search for a specific code EDIT Press the PRGRM key; enter the letter or code to be searched; press the CURSOR down arrow key to start searching in the current NC program. The code can be: a letter or a complete code. For example: "N0010", "M", etc. MDI input and run program MDI Press the PRGRM key to enter the program edit page; press the number/letter key to input the data into the input field, and press the INPUT key to input; after the input is completed, press the OUTPUT START key, and then press the START key to start the operation. Press the RESET key to clear the data. Edit NC program EDIT Press the PRGRM key; move the cursor: Press PAGE DOWN or UP ARROW to scroll, press CURSOR or move the cursor; press NUM/LETCH key to input data into the input field; press CAN to delete data in the input field; delete, insert , Replacement: Manually enter the NC program via the control box operation panel EDIT Press the PRGRM key; press → 7 0 to type the letter “Oâ€; press the number keys to type the program number, but it cannot duplicate the existing program number; press the INSERT key to start the program input; use the carriage return line/# EOB to end the line After the input line feed. Enter the program, each time you can enter a code; method, see Editing NC program input data operation and delete, insert, replace operation. Enter a NC program from the computer DNC Click on the menu "Machine/DNC Transfer..." to select the NC program file; press the PRGRM key; press the number keys to enter the program number "Oxxxx"; press the INPUT key to read in the NC program. Output NC program to computer EDIT Press the PRGRM key; press the OUTPUT START key; enter the file name in the dialog box and press the Save button. 358 Anti-Climb Fence,358 Mesh Fencing,358 Anti Climb Mesh,358 Security Fence Anping Xinghong Metal Wire Mesh Co.,Ltd , https://www.xinghongwiremesh.com
Press the DELETE key to delete the code where the cursor is located and press the INSERT key to insert the contents of the input field after the code where the cursor is located.
Press the ALTER key to replace the contents of the input field with the code where the cursor is located.
May 29, 2025