• Model NO.: TD-BPE500H
  • Shape: Arch Type
  • Type: Inland and Coastal Boats
  • Usage: Protection,Quay
  • Color: Black
  • Trademark: TIANDUN
  • Specification: PIANC2002, ISO9001, CCS
  • Material: Rubber
  • Size: 500h
  • Marine Parts: Fender, Bumper
  • Certification: BV, ISO9001, CCS, SGS
  • Assembly: with PE Pad
  • Transport Package: Container
  • Origin: Qingdao, China
Improved Arch Rubber Fender / Marine Fender
(TD-BPE500H,QPA500H,ANP500H,DA-A500H,SX500H)

Quick Detail:
1.PIANC standard approved;
2.High durability, simple structure ;
3.UHMW PE pads covered;
4.Wear resistant;
5.Low friction coefficient.
 
 
Applications:
The working surface of the 4th generation super arch fender is adhered with the PE resin boards directly,of which the service life is prolonged dramatically.The fender can be widely utilized on the wharves of both gravity and piled foundation with a DWT below 30,000 (50,000), shipyards, docks and shipborne fender system.So it is welcomed by clients,and become the mainstream of designer's selection.
 
Specifications:
Compounds Superhigh Reaction force(P2) High Reaction force(P1) Standard reaction force(P0) Low reaction force(P01)
Deflection     52.5% 55% 52.5% 55% 52.5% 55% 52.5% 55%
Performance
Length(mm)  		R
KN 		E
KN·M 		R
KN 		E
KN·M 		R
KN 		E
KN·M 		R
KN 		E
KN·M 		R
KN 		E
KN·M
 		 R
KN 		E
KN·M 		R
KN 		E
KN·M 		R
KN 		E
KN·M
1000L 538 114 748 122 414 88 574 94 344 72 476 78  294 63 408 65
1500L 807 171 1122   183 621 132 861 141 516 168 714 117 441 94 612 97
2000L 1076 228 1496 244 828 176 1148   188 688 144 952 156 588 126 816 130
2500L 1345 285 1870 305 1035 220 1435 235 835 180 1190 195 735 157 1020 162
3000L 1614 342 2244 366 1242 264 1722 282 1032 216 1428 87 882 189 1224 195
3500L 1883 399 2618 427 1449 308 2009 329 1204 252 1666 101 1029 220 1428 227
 
Note :Rated deflection 52.5%
          Maximum deflection 55%
          Performance tolerance:±10%
 
 
 
 
 
Description:
With the merits of high absorption energy,super arch rubber fenders are widely utilized, which can be laid with less restriction,and the dimensions of which are suitable to most installation conditions.The energy absorption per unit weight of which is only below that of the super cell rubber fenders, which is 3.5 times higher than that of the cylindrical type fenders, and 2.3 times higher than thar of D type rubber fenders.Therefore,the super arch rubber fenders can be manufactured with less amount of raw material.
 
 
Competitive Advantage:
l Simple installation
l Wide ranges of sizes and lengths
l PIANC tested and certificated
l Low-friction faced design
l Tough and reliable design
 
1.The friction factor is less than 0.2,which can reduced the torsion at the bottom of the fender dramatically,and can prolong the service life of the rubber fender.
2.The PE resin board can be restored easily.
3.The PE resin board can be restored as various colors,i.e.blue, gray and nacarat etc., which can make the product with a beautiful outlook and obvious visibility,so it is very suitable to the marinas and other scene attracting quays..

H-Beam

H section steel is a new type of economic building steel. The section shape of H beam is economical and reasonable, and the mechanical ability is good. When rolling, each point on the section extends more evenly and the internal stress is small. Compared with ordinary I-Beam, it has the advantages of large section modulus, light weight and metal saving, which can reduce the building structure by 30-40%. And because its legs are parallel inside and outside, the leg end is a right Angle, assembly and combination into components, can save welding, riveting work up to 25%. It is often used in large buildings (such as factories, high-rise buildings, etc.) that require large bearing capacity and good cross-section stability, as well as Bridges, ships, hoisting machinery, equipment foundation, bracket, foundation pile, etc.
H section steel is a kind of economic section steel with better mechanical properties, which is optimized and developed from I-section steel, especially the section with the same English letter "H". Its characteristics are as follows: Wide flange, high side stiffness.
â—† Strong bending ability, about 5%-10% than I-beam.
The two surfaces of the flange are parallel to each other, which makes the connection, processing and installation easy.
â—† Compared with welding I-beam, low cost, high precision, low residual stress, no need for expensive welding materials and weld detection, saving steel structure production cost about 30%.
â—† Under the same section load. Hot rolled H steel structure is 15%-20% lighter than traditional steel structure.
â—† Compared with concrete structure, the use area of hot-rolled H steel structure can be increased by 6%, and the self-weight of the structure can be reduced by 20% to 30%, thus reducing the internal force of the structure design.
H beam can be processed into T beam, honeycomb beam can be combined to form various section forms, greatly meet the needs of engineering design and production.

H-Beams,H Beam,Steel H Beam,H Beam Steel

Tianjin Youfa Steel Co., Ltd , https://www.cnyoufasteel.com

November 05, 2024