Ce Scrap Cable Recycling Machine for Sale

1. Put wires and cables into the crusher, in which they are crushed and plastic sheath and copper separated completely. The length of the crushed material is based on the mesh of the riddle: the bigger the mesh is the longer the crushed material will be and the larger the output will be. The mesh should be chosen in production according to the type of the material.
2. The crushed material (mixture of copper granules and plastic pieces) is conveyed to the separator by the conveyor, during which procedure dust and part of plastic pieces of light weight(including fiber, rope, or tapes, etc. mixed in the wires) are collected by the pressure-reducing blower. The above opening of the pressure reducing blower is connected with the dust collector opening in which a dust collecting bag is used to prevent discharge of dust for the purpose of environmental protection. Dust and part of plastic pieces of light weight are collected in this bag and will be discharged when the bag is full.
3. The separator is used for separating plastic pieces and copper granules. According to the differences of the physical properties and specific gravity between different materials, there is specific gravity deviation under the forces of Aerodynamic and Vibration friction. By adjusting the speed of material conveying and amplitude parameters, copper granules (of larger specific gravity) will move to the riddle bottom and move from down to up, and plastic pieces (of smaller specific gravity) will move to the above of copper granules and move from up to down, and in the end they will both be discharged through different openings.
4. All the units are installed on the Underbed to form a whole structure. The machine is adjusted ready for production before shipping, and the customer only need to connect it to the power supply.

Scrap cable recycling machineTechnical Parameters: 

ModelÂ	Recycling capacity	Processed wire dia.	Total power	Voltage	DimensionÂ	WeightÂ
QJF-400-1	80-100kg/h	    0.3-20mm	11.92KW	    Adjustable	1.5*1.5*1.9m	750kg
QJF-400	200-300kg/h		23.12KW		2.7*1.9*2.3m	1200kg
QJF-600A	300-400kg/h		48.36KW		4*1.85*2.4m	3400kg
QJF-600	300-400kg/h		52.36KW		4.3*1.95*2.4m	3400kg
QJF-800	600-700kg/h	0.1-40mm	75.4KW		9.1*2.3*3.54m	8000kg

   
Scrap cable recycling machine Different Models:  


FAQ 
 1.Is there quick-wear part on the machine? 
The spare part of the machine is blades and screen, their use life is more than 2 years, and we could also supply blade sharping machine to you for maintenance.
 2. What's the lognest continuous working time for the recycling machine?   
 Normally 10 hours per day. 
 3.Is the machine easy to operate? How many workers required to operate it? 
We design precise but simple control system for the machine.
For single recycling machine, only one worker is required.
For complete recycling line, two workers are required.

Pls Contact Angel at 008618136656333 for more info.

1. Put wires and cables into the crusher, in which they are crushed and plastic sheath and copper separated completely. The length of the crushed material is based on the mesh of the riddle: the bigger the mesh is the longer the crushed material will be and the larger the output will be. The mesh should be chosen in production according to the type of the material.
2. The crushed material (mixture of copper granules and plastic pieces) is conveyed to the separator by the conveyor, during which procedure dust and part of plastic pieces of light weight(including fiber, rope, or tapes, etc. mixed in the wires) are collected by the pressure-reducing blower. The above opening of the pressure reducing blower is connected with the dust collector opening in which a dust collecting bag is used to prevent discharge of dust for the purpose of environmental protection. Dust and part of plastic pieces of light weight are collected in this bag and will be discharged when the bag is full.
3. The separator is used for separating plastic pieces and copper granules. According to the differences of the physical properties and specific gravity between different materials, there is specific gravity deviation under the forces of Aerodynamic and Vibration friction. By adjusting the speed of material conveying and amplitude parameters, copper granules (of larger specific gravity) will move to the riddle bottom and move from down to up, and plastic pieces (of smaller specific gravity) will move to the above of copper granules and move from up to down, and in the end they will both be discharged through different openings.
4. All the units are installed on the Underbed to form a whole structure. The machine is adjusted ready for production before shipping, and the customer only need to connect it to the power supply.

Scrap cable recycling machineTechnical Parameters: 

ModelÂ	Recycling capacity	Processed wire dia.	Total power	Voltage	DimensionÂ	WeightÂ
QJF-400-1	80-100kg/h	    0.3-20mm	11.92KW	    Adjustable	1.5*1.5*1.9m	750kg
QJF-400	200-300kg/h		23.12KW		2.7*1.9*2.3m	1200kg
QJF-600A	300-400kg/h		48.36KW		4*1.85*2.4m	3400kg
QJF-600	300-400kg/h		52.36KW		4.3*1.95*2.4m	3400kg
QJF-800	600-700kg/h	0.1-40mm	75.4KW		9.1*2.3*3.54m	8000kg

   
Scrap cable recycling machine Different Models:  


FAQ 
 1.Is there quick-wear part on the machine? 
The spare part of the machine is blades and screen, their use life is more than 2 years, and we could also supply blade sharping machine to you for maintenance.
 2. What's the lognest continuous working time for the recycling machine?   
 Normally 10 hours per day. 
 3.Is the machine easy to operate? How many workers required to operate it? 
We design precise but simple control system for the machine.
For single recycling machine, only one worker is required.
For complete recycling line, two workers are required.

Pls Contact Angel at 008618136656333 for more info.

Generally refers to the anchor anchor, is the main component of mooring equipment. A device made of iron, even in the boat with chains, thrown in the bottom or the shore, can make the boat stop.The ancient anchor is a large stone, or stone filled the basket, called the "anchor". Anchor rope tied stone sink to the bottom, according to the weight of the ship. Later, there is a stone anchor, that is, in the stone on both sides of the Department of wood claws, by weight and grip force to anchor the ship. The Chinese for metal anchor records. China ancient sailing ship with four jaw anchor, the anchor of good performance, so far in the sampan and boats are still in use.Modern anchor cast steel or forged steel manufacturing, there are four main types.

Photo of our Ship Anchor:

The anchor rod anchor and anchor: usually as a whole, and there is a bar perpendicular to the plane. There are two claws, and some are single claw. When using a claw mesh buried in the deep, grasping force, but because of the inconvenience, bar, used for small ships. There are major types of anchor rod anchor (Figure 1), one claw anchor (Figure 2) Foshan anchor, Japanese anchor, etc..

The stockless anchor: anchor and anchor can be relatively rotated a certain angle, no bar. Use two mesh and buried in the anchor, anchor and convenient collection, the most widely used. No representative of the anchor rod anchor Holzer (Figure 3) and its modified Baker anchor.

The anchor fluke: large, can rotate a certain angle, the central anchor head with prominent rod or fluke, stability. Due to large area soil engaging fluke, grasping force, suitable for sandy soil or soft bottom. HHP main types are Danforth anchor, anchor, Markov large claw anchor boat.

Special anchor (4): the general shape of different anchor, such as mushroom anchor, the anchor head a mushroom or umbrella, meshing, buried deep, big grasp force, is not easy to move much used for long-term mooring and positioning with, such as a lightship, pontoons, barges and other fixed anchor.

Ship Anchor

Combined Ship Anchor,Hydraulic Ship Anchor,Welding Ship Anchor,Electric Ship Anchor

Unisite Group Ltd. , http://www.unisitemarine.com