W Series Horizontal Continuous Decanter Centrifuge /Decanter Centrifuge Separator

Wide-ranging performance

Decanter centrifuge from Reyes Separator provide exceptional performance whenseparating solids from liquids, and make it possible to do so continuously,efficiently and controllably.

Reyes decanter centrifuges are designed to handle a wide range ofsolid particles with diameters from 5mm to a few microns.

Decanter centrifuge can also handle slurries with a solid content from as low as 0.1% w/w to more than 65% w/w.
 

2 - phase separation:


 

The feed suspension is introduced through an inlet pipe into the feed zone of the conveyor where it is accelerated and directed into the interior of the bowl. The settled solids are conveyed axially towards the small end of the bowl by means of the screw conveyor, which rotates at a slightly different speed than the bowl. On the way to the discharge ports the solids are lifted out of the pond up along the dry beach. The solids are finally discharged from the bowl through the discharge ports into the collecting chamber of the casing that surrounds the bowl. From there the solids are removed by gravity through the outlet funnel. The liquid phase forming a hollow cylinder due to the centrifugal force, and flows towards the large end of the bowl. There the liquid overflows adjustable plate dams into the centrate chamber of the casing and is discharged by gravity.
 

3 - phase separation:


 

The light liquid phase is discharged into the casing through radial holes in the large end hub. The heavy liquid phase is discharged through axial holes in the large end hub. The liquid radius for the light liquid phase is smaller than the radius for the heavy liquid phase. The liquid level is controlled by plate dams. In order to prevent the light liquid phase from leaving the bowl through the heavy liquid phase outlet, a separating plate is placed on the inside of the large end hub. The heavy liquid phase has to pass under the separating plate before being discharged into the casing. The liquid radius for the heavy liquid phase is controlled by plate dams. The solids are discharged in the normal way.

Features

• All parts coming into contact with the product are made of stainless steel.
• 3-phase AC motor for controlled torque starting via frequency converter
• Bowl speed is adjustable via VFD to obtain the required G-force for optimized separation
• Pond depth in the bowl is adjustable for optimized balance between liquid clarity and solids dryness
• Conveying speed is adjustable for optimized balance between liquid
• Low personnel costs due to continuous and automatic operation.
• Highest g-force for higher solids output
• Automatic adjustment of differential speed via VFD
• Two motor drive
• Belts for both primary motor and secondary motor

The bowl, conveyor, inlet tube, outlets, cover and other parts in direct contact with the process media are all made of stainless steel. The discharge ports, conveyor flights and feed zone are protected with materials that are highly resistant to erosion. The frame is made of mild steel with an epoxy enamel finish. 

Reyes Separator supply a wide range of wear protection to meet the requirements of the many different applications, including:

• Welded hard facing or spray coating
• Ceramic
• Tungsten carbide tiles
• Chilled hard metal portcastings
• Plastic liners

 
Design
The rotating part of these avocado oil tricanter centrifuges is mounted on a compact, in-line frame, with main bearings at both ends. Vibration dampers are placed under the frame. The rotating part is enclosed in a casing with a cover and a bottom section with integrated outlets for both solids and the liquid being removed.
Technical Paramter: