Model NO.: M6
Engine Trype: Outboard
Usage: Boat
Certification: Ce, ISO9001
Transom Height: 440mm
Trademark: HANGKAI
Transport Package: 112X62X39cm/26kg
Specification: CE
Origin: China


Water Cooling 6hp 2 Stroke Boat Outboard Motor HANGKAI M6

TWO STROKE HANGKAI 6HP OUTBOARD ENGINE FEATURES:

1. Compact and lightweight outboard engines, only 21kgs
2. Innovative CDI ignition system for easy starting engines
3. Twist grip throttle for easy maneuverability and safety
4. Safety lanyard/emergency shut off
5. Thermostat controlled water cooling system for consistent engine
 temperature
6. Heavy duty aluminum propeller
7. Convenient 2.5L integral fuel tank
8. Vibration reduction system
9. Start in gear protection
10. Ultra low emission
11. Carrying handle

 

OPTIONS:

12L or 24L separate fuel tank and hose for select
SPEEDA 5hp outboard engines are simply the best value for quality 5hp outboards in its class. 
Durable, Reliable, Fuel efficient, Quiet and Superior performance. 

They also have the power and reliability to take you almost anywhere. And we  know that wherever you go you want to get there as economically as possible and with no worries or 
bother.

 

Specification:

1)Max. Output: 4.4KW /6HP

2)Full throttle operating range (rpm): 4500-5500

3)Stroke: 2

4)Cylinder:1 

5)Displacement (ml): 102CC

6)Bore×Stroke (mm): 55×43

7)Dimensions (L×W× H) mm: 490×320×1060

8)Transom height: 44cm

9)Starting system: Manual

10)Control system: manual tilt

11)Gear shift position: F-N-R

12)Gear ratio:2.08(27:13)

13)Propeller options: 3-7.8 "×8"

14) Recommended Fuel: # 93 Lead-free gasoline

15)Recommended Gear Oil: Professional Gear Oil

16)Lubrication System: Mixed fuel & oil (25/45:1)

 


Other Details Information:


 Water Cooling 6HP 2 Stroke Boat Outboard Motor Hangkai M6

Water Cooling 6HP 2 Stroke Boat Outboard Motor Hangkai M6

Water Cooling 6HP 2 Stroke Boat Outboard Motor Hangkai M6

Water Cooling 6HP 2 Stroke Boat Outboard Motor Hangkai M6Water Cooling 6HP 2 Stroke Boat Outboard Motor Hangkai M6
Water Cooling 6HP 2 Stroke Boat Outboard Motor Hangkai M6



 

Heat Pump System

Heat pumps are used to transfer heat because less high-grade energy is required than is released as heat. Most of the energy for heating comes from the external environment, only a fraction of which comes from electricity (or some other high-grade energy source required to run a compressor). In electrically-powered heat pumps, the heat transferred can be three or four times larger than the electrical power consumed, giving the system a coefficient of performance (COP) of 3 or 4, as opposed to a COP of 1 for a conventional electrical resistance heater, in which all heat is produced from input electrical energy.

Heat pumps use a refrigerant as an intermediate fluid to absorb heat where it vaporizes, in the evaporator, and then to release heat where the refrigerant condenses, in the condenser. The refrigerant flows through insulated pipes between the evaporator and the condenser, allowing for efficient thermal energy transfer at relatively long distances.

The series as below:
1. Air Source Heat Pump . 
Cooling capacity: 20kW-50kW, with world famous brand COPELAND/DANFOSS scroll compressor.
2.Water Source Heat Pump. 
Cooling capacity: 10kW-130kW. With world famous brand COPELAND/DANFOSS scroll compressor.
3.Geothermal Heat Pump
Cooling capacity:130kW-2500kW. With world famous brand BITZER screw compressor.
4.Low Ambient Temperature Air Source Heat Pump
Cooling capacity:10kW-20kW, With world famous brand COPELAND/DANFOSS scroll compressor.
5.Water To Air Heat Pump
Cooling capacity 2.5kW-45kW. With world famous brand COPELAND/DANFOSS scroll compressor or PANASONIC/HILY rotary compressor.
6. Water Loop Heat Pump
Cooling capacity 2.5kW-45kW. With world famous brand COPELAND/DANFOSS scroll compressor or PANASONIC/HILY rotary compressor.

Heat Pump System

Heat Pump System,Pump for Heating System,Heat Pump Solar System,Water Heat Pump System

Jinan Amrta Air Conditioning Co.,Ltd , https://www.waterchiller.pl

May 14, 2020