Model NO.: FS2
Trademark: Anhusheng
Specification: CE APPROVED
Origin: China
HS Code: 8543709100
Model NO.: FS2
Trademark: Anhusheng
Specification: CE APPROVED
Origin: China
HS Code: 8543709100
         FS2 Gold Detector for Treasure Hunting

 Fs2 Gold Detector for Treasure Hunting

Introduction:

FS2 is unique among gold prospecting metal detectors for its combination of high sensitivity to small gold nuggets and its versatile function as an all-purpose treasure detector.

Fs2 Gold Detector for Treasure Hunting

The controls and features are tailored to gold prospecting, including a sophisticated ground balancing system, separate control over signal gain and threshold, and a unique discrimination control system. These features also make for a great relic-hunting detector, especially when the FS2 is outfitted with the optional 11" DD search coil. While the FS2 makes for a highly competent coin-shooting detector, its user interface and features are not specifically designed for this purpose. As a coin-shooter, you will notice that the FS2 exhibits slightly lower sensitivity to high conductivity coins, like a U.S. quarter; this is a result of its specialized design to emphasize sensitivity to small low conductivity metals like gold nuggets.

Fs2 Gold Detector for Treasure HuntingFs2 Gold Detector for Treasure Hunting
Device Specifications:
 
Mechanical: S-rod with electronics housing on rod, 3-piece breakdown construction, nonmetallic telescoping lower rod, adjustable position arm rest
Operating principle: VLF induction balance
Operating frequency: 19 kHz, crystal controlled
Ground balance range: From ferrite to salt water inclusive
Discrimination ground suppression: Combination of 2" and 3" order methods
Target 10 ground suppression: 3rd order
Operating temp range: 14 to 122 degrees F (-10 to +50 C)
Weight: 2 Ibs, 8 oz with battery installed
Batteries: Single 9 volt rectangular alkaline
Standard search coisl: 5"+11"


Product accessories details:

Fs2 Gold Detector for Treasure Hunting

Specification:
 

Mechanical:

S-rod with electronics housing on rod, 3-piece breakdown

construction

nonmetallic telescoping lower rod, adjustable position arm rest

Weight:

2 lbs, 8 oz with battery installed

Standard search coil:

 5 inch (12.3 cm) closed-frame round biaxial, not waterproof

Batteries:

Single 9 volt rectangular alkaline

Battery life:

15+ hours on good quality alkaline

Operating principle:

 VLF induction balance

Operating frequency:

19 kHz, crystal controlled

Reactive overload:

10,000 micro-cgs (with standard search coil)

Resistive overload:

1,200 micro-cgs (with standard search coil)

Ground balance range:

From ferrite to salt water inclusive

Discrimination ground suppression:

Combination of 2nd and 3rd

Target ID ground suppression:

3rd order

Operating temp range:

14 to 122 degrees F (-10 to +50 C)

Operating humidity range:

0 - 90% noncondensing
         FS2 Gold Detector for Treasure Hunting

 Fs2 Gold Detector for Treasure Hunting

Introduction:

FS2 is unique among gold prospecting metal detectors for its combination of high sensitivity to small gold nuggets and its versatile function as an all-purpose treasure detector.

Fs2 Gold Detector for Treasure Hunting

The controls and features are tailored to gold prospecting, including a sophisticated ground balancing system, separate control over signal gain and threshold, and a unique discrimination control system. These features also make for a great relic-hunting detector, especially when the FS2 is outfitted with the optional 11" DD search coil. While the FS2 makes for a highly competent coin-shooting detector, its user interface and features are not specifically designed for this purpose. As a coin-shooter, you will notice that the FS2 exhibits slightly lower sensitivity to high conductivity coins, like a U.S. quarter; this is a result of its specialized design to emphasize sensitivity to small low conductivity metals like gold nuggets.

Fs2 Gold Detector for Treasure HuntingFs2 Gold Detector for Treasure Hunting
Device Specifications:
 
Mechanical: S-rod with electronics housing on rod, 3-piece breakdown construction, nonmetallic telescoping lower rod, adjustable position arm rest
Operating principle: VLF induction balance
Operating frequency: 19 kHz, crystal controlled
Ground balance range: From ferrite to salt water inclusive
Discrimination ground suppression: Combination of 2" and 3" order methods
Target 10 ground suppression: 3rd order
Operating temp range: 14 to 122 degrees F (-10 to +50 C)
Weight: 2 Ibs, 8 oz with battery installed
Batteries: Single 9 volt rectangular alkaline
Standard search coisl: 5"+11"


Product accessories details:

Fs2 Gold Detector for Treasure Hunting

Specification:
 

Mechanical:

S-rod with electronics housing on rod, 3-piece breakdown

construction

nonmetallic telescoping lower rod, adjustable position arm rest

Weight:

2 lbs, 8 oz with battery installed

Standard search coil:

 5 inch (12.3 cm) closed-frame round biaxial, not waterproof

Batteries:

Single 9 volt rectangular alkaline

Battery life:

15+ hours on good quality alkaline

Operating principle:

 VLF induction balance

Operating frequency:

19 kHz, crystal controlled

Reactive overload:

10,000 micro-cgs (with standard search coil)

Resistive overload:

1,200 micro-cgs (with standard search coil)

Ground balance range:

From ferrite to salt water inclusive

Discrimination ground suppression:

Combination of 2nd and 3rd

Target ID ground suppression:

3rd order

Operating temp range:

14 to 122 degrees F (-10 to +50 C)

Operating humidity range:

0 - 90% noncondensing

Product description

The steel cage roll welder can automatically handle the pile cage 15m-27m. According to the construction requirements, the transverse steel bars are inserted into the sleeves fixed on the rotating disc, and the longitudinal round wires are taken and welded to a transverse reinforcing bar.


Features

1. The steel cage rolling welder has high automation degree and wide application range. It has adjustable steel cage diameter, adjustable main reinforcement number, adjustable hoop distance and adjustable motor speed. 

2. The whole machine adopts advanced modular planning thinking, which can be conveniently disassembled and assembled, with friendly control interface, simple and convenient operation, and convenient transportation. 

3, key parts, using high standard production specifications, reduce equipment failure rate, reduce operating costs. 

4. The steel cage rolling welder has strong adaptability to the site, and can be reasonably placed according to the size of the site and the length of the steel cage.

Cnc Steel Cage Welding Machine

Steel Welding Machine,Steel Cage Welding Machine,Stainless Steel Welding Machine,Cnc Steel Cage Welding Machine

Boron Machinery Manufacturing CO. LTD , https://www.boronjx.com

May 04, 2020